Kann ich dass noch reparieren?
Oder geht es mit neu formatieren?
Folgendes Meldungen habe ich bekommen
Code: Alles auswählen
sudo fsck /dev/sdd
fsck von util-linux 2.36.1
e2fsck 1.46.2 (28-Feb-2021)
ext2fs_open2: Bad magic number in super-block
fsck.ext2: Superblock invalid, trying backup blocks...
fsck.ext2: Bad magic number in super-block while trying to open /dev/sdd
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
Found a gpt partition table in /dev/sdd
Code: Alles auswählen
sudo smartctl -t long /dev/sdd
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-28-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION ===
Sending command: "Execute SMART Extended self-test routine immediately in off-line mode".
Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful.
Testing has begun.
Please wait 335 minutes for test to complete.
Test will complete after Sat Apr 13 02:40:51 2024 CEST
Use smartctl -X to abort test.
Code: Alles auswählen
sudo smartctl -H /dev/sdd
smartctl 7.2 2020-12-30 r5155 [x86_64-linux-5.10.0-28-amd64] (local build)
Copyright (C) 2002-20, Bruce Allen, Christian Franke, www.smartmontools.org
Read Device Identity failed: scsi error medium or hardware error (serious)
A mandatory SMART command failed: exiting. To continue, add one or more '-T permissive' options.