KDE, Gnome, Windowmanager, X11, Grafiktreiber und alles was dazu notwendig ist. Schau auch in den "
Tipps und Tricks"-Bereich.
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 16.01.2005 13:53:48
hallo,
habe mir das netinstall iso gezogen und installiert. danach mit apt-get x-window openbox und gdm installiert.
danach
und tastaturvariante 104 und 105 gewählt. bei beiden habe ich das problem, dass die Alt Gr taste nicht funz. kann also kein [ und ~ zeichen darstellen. ausserdem funz das scrollrad nicht. habt hier ne idee?
thx
docnet
break on through to the other side
-
Babelduo
- Beiträge: 518
- Registriert: 25.01.2004 17:01:37
Beitrag
von Babelduo » 16.01.2005 13:56:23
hast du denn auch beim konfigurieren
"rollen eines mausrads interpretieren"
auf ja gesetzt?
zu dem alt-gr weis ich im mom nix, sorry
Wenn ich alles sehen könnte würde ich lernen die Augen zu schließen...
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 16.01.2005 14:00:00
Babelduo hat geschrieben:hast du denn auch beim konfigurieren
"rollen eines mausrads interpretieren"
auf ja gesetzt?
ja, hab ich
break on through to the other side
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 17.01.2005 21:48:34
kann immer noch kein ~~und @ zeichen machen.
wer kann mir helfen
break on through to the other side
-
mistersixt
- Beiträge: 6601
- Registriert: 24.09.2003 14:33:25
- Lizenz eigener Beiträge: GNU Free Documentation License
Beitrag
von mistersixt » 18.01.2005 09:28:16
Poste doch mal bitte die Section "InputDevice" bezgl. Deiner Tastatur aus /etc/X11/XF86Config-4 .
Gruss, mistersixt.
--
System: Debian Bookworm, 6.5.x.-x-amd64, ext4, AMD Ryzen 7 3700X, 8 x 4.0 Ghz., Radeon RX 5700 XT, 16 GB Ram, XFCE
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 18.01.2005 09:58:51
okey, werde ich heute abend machen. bin gerade am arbeiten.
danke
break on through to the other side
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 18.01.2005 19:12:26
so, hier nun mal meine XF86Config-4
Code: Alles auswählen
Section "Files"
FontPath "unix/:7100" # local font server
# if the local font server has problems, we can fall back on these
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/cyrillic"
FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/CID"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/lib/X11/fonts/100dpi"
FontPath "/usr/lib/X11/fonts/75dpi"
EndSection
Section "Module"
Load "GLcore"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "speedo"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "105"
Option "XkbOptions" "nodeadkeys"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Generic Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
Option "Device" "/dev/input/mice"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Device"
Identifier "NVIDIA Corporation NV11 [GeForce2 MX/MX 400]"
bye
break on through to the other side
-
Snoopy
- Beiträge: 4296
- Registriert: 17.11.2003 18:26:56
- Lizenz eigener Beiträge: MIT Lizenz
- Wohnort: Rh.- Pflz.
Beitrag
von Snoopy » 18.01.2005 19:55:11
hi
also bzgl deiner
alt gr taste sollte fogendes reichen
Code: Alles auswählen
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "nodeadkeys"
EndSection
beachte: bei kde und auch gnome kannst du abweichende konfigurationen haben
soll heissen: bei kde wie auch bei gnome kannst/musst du evtl. ein andres layout verwenden, als in deiner xf86config-4 angegeben
[edit]
bsp kde
einstellungen => kontrollzentrum => regionaleinstellungen & zugangshilfen => aktive belegung: deutsch (de)
tastaturtyp: generischer 105-tasten-(intl)-pc
[/edit]
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 19.01.2005 15:51:51
@Snoopy
danke für deine antwort, leider hilft sie mir nicht wirklich weiter. kann keinen untersied zur deine XF86Config-4 erkennen.
Code: Alles auswählen
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "de"
Option "XkbVariant" "105"
Option "XkbOptions" "nodeadkeys"
EndSection
habe ich etwas übersehen?
bye
break on through to the other side
-
Snoopy
- Beiträge: 4296
- Registriert: 17.11.2003 18:26:56
- Lizenz eigener Beiträge: MIT Lizenz
- Wohnort: Rh.- Pflz.
Beitrag
von Snoopy » 19.01.2005 16:16:36
hi
das zb hab ich nicht
und die komplette tastatur funktioniert einwandfrei
hast du den kde/gnome mal geprüft ob "intern" das richtige layout benutzt wird ?
-
AJ
- Beiträge: 28
- Registriert: 12.08.2004 10:37:34
Beitrag
von AJ » 19.01.2005 16:23:14
zwei Vorschläge:
1) unter "xkbvariant" muss "nodeadkeys" stehen und nicht "105"
2) unter "protocol" (configured mouse) muss "ImPS/2" stehen
so zumindest bei meiner Config
-
docNet
- Beiträge: 876
- Registriert: 03.08.2004 15:00:06
- Wohnort: Wiesbaden
Beitrag
von docNet » 19.01.2005 20:30:45
super dass war's. vielen dank an euch
@Snoopy
ich benutze keine kde/gnome.
bye
break on through to the other side