GForce GP108 (GT1030) unter Kernel >6.1
GForce GP108 (GT1030) unter Kernel >6.1
Hallo,
ich habe eine GeForce GT 1030 und würde diese gerne unter dem aktuellen Testing weiter verwenden.
Gibt es hier eine Möglichkeit?
Thx!
ich habe eine GeForce GT 1030 und würde diese gerne unter dem aktuellen Testing weiter verwenden.
Gibt es hier eine Möglichkeit?
Thx!
Re: GForce GP108 (GT1030) unter Kernel >6.1
In Testing läuft Kernel 6.3.x-x
Re: GForce GP108 (GT1030) unter Kernel >6.1
und 6.3 ist kleiner als 6.1?
Re: GForce GP108 (GT1030) unter Kernel >6.1
Was hast du denn schon ausprobiert oder was deutet für dich darauf hin, dass die Karte unter Testing nicht mehr unterstützt werde?
Laut der /usr/share/doc/nvidia-driver/README.txt.gz im nvidia-driver-Paket aus Trixie sollte die Karte vom Treiber unterstützt sein.
Laut der /usr/share/doc/nvidia-driver/README.txt.gz im nvidia-driver-Paket aus Trixie sollte die Karte vom Treiber unterstützt sein.
Manchmal bekannt als Just (another) Terminal Hacker.
Re: GForce GP108 (GT1030) unter Kernel >6.1
Hallo,
ich habe nach dem Fehler gegoogelt:
Unter Kernel 6.1.0-7-amd64 läuft sie jetzt ... ich trau mich schon gar nicht den aktuellen zu installieren, sonst gibt's wieder Probleme ... und das googeln über Smartphone macht keinen Spass.
ich habe nach dem Fehler gegoogelt:
und bin dann auf einen Thread gestossen, in dem beschrieben stand, dass die Karte wohl ab Debian 12 nicht mehr supported wird. Ich fand das schon etwas komisch.DKMS make.log for evdi-5.2.14 for kernel 6.1.0-7-amd64 (x86_64)
Sun Jul 23 11:00:03 CEST 2023
make KBUILD_VERBOSE=1 SUBDIRS=/var/lib/dkms/evdi/5.2.14/build SRCROOT=/var/lib/dkms/evdi/5.2.14/build CONFIG_MODULE_SIG= -C /lib/modules/6.1.0-7-amd64/build modules
make[1]: Entering directory '/usr/src/linux-headers-6.1.0-7-amd64'
/usr/src/linux-headers-6.1.0-7-common/Makefile:149: =============== ERROR ==============
/usr/src/linux-headers-6.1.0-7-common/Makefile:150: 'SUBDIRS' was removed in Linux 5.3
/usr/src/linux-headers-6.1.0-7-common/Makefile:151: Use 'M=' or 'KBUILD_EXTMOD=' instead
/usr/src/linux-headers-6.1.0-7-common/Makefile:152: ====================================
/usr/src/linux-headers-6.1.0-7-common/Makefile:153: *** .. Stop.
make[1]: Leaving directory '/usr/src/linux-headers-6.1.0-7-amd64'
make: *** [Makefile:22: all] Error 2
Unter Kernel 6.1.0-7-amd64 läuft sie jetzt ... ich trau mich schon gar nicht den aktuellen zu installieren, sonst gibt's wieder Probleme ... und das googeln über Smartphone macht keinen Spass.
und in der Log-Datei steht wieder obiger Fehler.# apt-get install linux-image-6.3.0-1-amd64
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
appstream dalvik-exchange dctrl-tools dh-dkms freeglut3 gcc-12-base:i386 gdisk gir1.2-wnck-3.0 libandroid-23-java
libblockdev-crypto2 libblockdev-fs2 libblockdev-loop2 libblockdev-part-err2 libblockdev-part2 libblockdev-swap2 libblockdev-utils2
libblockdev2 libbpf0 libchamplain-0.12-0 libchamplain-gtk-0.12-0 libelf-dev libffms2-5 libflac8:i386 libgs9-common libgssdp-1.2-0
libgupnp-1.2-1 libicu71 libicu71:i386 libkf5activitiesstats1 libkf5idletime5 liblc3-0 libllvm14:i386 libmpdec3 libmujs2
libmutter-10-0 libopenal1:i386 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libperl5.34 libpoppler123 libprocps8
libprotobuf23 libpython3.10 libpython3.10-minimal libpython3.10-stdlib libquazip5-1 librygel-core-2.6-2 librygel-db-2.6-2
librygel-renderer-2.6-2 librygel-server-2.6-2 libsane libsixel1 libsnapd-glib1 libsndio7.0:i386 libtiff5:i386 libuuid1:i386
libvkd3d-shader1:i386 libvkd3d1:i386 libvorbisidec1 libxvmc1 libykpers-1-1 libyubikey-udev libyubikey0 libzstd-dev
linux-compiler-gcc-11-x86 linux-compiler-gcc-8-x86 linux-compiler-gcc-9-x86 linux-config-5.19 linux-config-6.0 linux-config-6.1
linux-kbuild-5.19 linux-kbuild-5.2 linux-kbuild-5.3 linux-kbuild-6.0 linux-source-5.19 packagekit packagekit-tools
perl-modules-5.34 python3-numpy python3-renderpm python3-reportlab-accel python3.10 python3.10-minimal rsync ruby3.0 viagee
vkd3d-compiler:i386 xfce4-datetime-plugin
Use 'apt autoremove' to remove them.
Suggested packages:
linux-doc-6.3 debian-kernel-handbook
The following NEW packages will be installed:
linux-image-6.3.0-1-amd64
0 upgraded, 1 newly installed, 0 to remove and 1 not upgraded.
2 not fully installed or removed.
Need to get 0 B/74.3 MB of archives.
After this operation, 464 MB of additional disk space will be used.
Selecting previously unselected package linux-image-6.3.0-1-amd64.
(Reading database ... 310002 files and directories currently installed.)
Preparing to unpack .../linux-image-6.3.0-1-amd64_6.3.7-1_amd64.deb ...
Unpacking linux-image-6.3.0-1-amd64 (6.3.7-1) ...
Setting up linux-headers-6.3.0-1-amd64 (6.3.7-1) ...
/etc/kernel/header_postinst.d/dkms:
dkms: autoinstall for kernel 6.3.0-1-amd64 was skipped since the kernel headers for this kernel do not seem to be installed.
Setting up linux-image-6.3.0-1-amd64 (6.3.7-1) ...
I: /vmlinuz.old is now a symlink to boot/vmlinuz-6.1.0-7-amd64
I: /initrd.img.old is now a symlink to boot/initrd.img-6.1.0-7-amd64
I: /vmlinuz is now a symlink to boot/vmlinuz-6.3.0-1-amd64
I: /initrd.img is now a symlink to boot/initrd.img-6.3.0-1-amd64
/etc/kernel/postinst.d/dkms:
dkms: autoinstall for kernel 6.3.0-1-amd64 was skipped since the kernel headers for this kernel do not seem to be installed.
/etc/kernel/postinst.d/initramfs-tools:
update-initramfs: Generating /boot/initrd.img-6.3.0-1-amd64
/etc/kernel/postinst.d/zz-update-grub:
Generating grub configuration file ...
Found background image: /usr/share/images/desktop-base/desktop-grub.png
Found linux image: /boot/vmlinuz-6.3.0-1-amd64
Found initrd image: /boot/initrd.img-6.3.0-1-amd64
Found linux image: /boot/vmlinuz-6.1.0-7-amd64
Found initrd image: /boot/initrd.img-6.1.0-7-amd64
Found linux image: /boot/vmlinuz-5.19.0-1-amd64
Found initrd image: /boot/initrd.img-5.19.0-1-amd64
Found linux image: /boot/vmlinuz-5.2.0-2-amd64
Found initrd image: /boot/initrd.img-5.2.0-2-amd64
Found linux image: /boot/vmlinuz-4.9.0-4-amd64
Found initrd image: /boot/initrd.img-4.9.0-4-amd64
Warning: os-prober will not be executed to detect other bootable partitions.
Systems on them will not be added to the GRUB boot configuration.
Check GRUB_DISABLE_OS_PROBER documentation entry.
done
Setting up linux-headers-6.1.0-7-amd64 (6.1.20-2) ...
/etc/kernel/header_postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-7-amd64.
Sign command: /usr/lib/linux-kbuild-6.1/scripts/sign-file
Signing key: /var/lib/dkms/mok.key
Public certificate (MOK): /var/lib/dkms/mok.pub
Building module:
Cleaning build area...(bad exit status: 2)
make -j4 KERNELRELEASE=6.1.0-7-amd64 all INCLUDEDIR=/lib/modules/6.1.0-7-amd64/build/include KVERSION=6.1.0-7-amd64 DKMS_BUILD=1...(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.1.0-7-amd64 (x86_64)
Consult /var/lib/dkms/evdi/5.2.14/build/make.log for more information.
dkms autoinstall on 6.1.0-7-amd64/x86_64 succeeded for nvidia-current
dkms autoinstall on 6.1.0-7-amd64/x86_64 failed for evdi(10)
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
dkms: autoinstall for kernel: 6.1.0-7-amd64 failed!
run-parts: /etc/kernel/header_postinst.d/dkms exited with return code 11
Failed to process /etc/kernel/header_postinst.d at /var/lib/dpkg/info/linux-headers-6.1.0-7-amd64.postinst line 11.
dpkg: error processing package linux-headers-6.1.0-7-amd64 (--configure):
installed linux-headers-6.1.0-7-amd64 package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
linux-headers-6.1.0-7-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
Re: GForce GP108 (GT1030) unter Kernel >6.1
Irgendwie selbsterklärend, oder?nahemoth hat geschrieben:23.07.2023 16:34:14dkms: autoinstall for kernel 6.3.0-1-amd64 was skipped since the kernel headers for this kernel do not seem to be installed.
Re: GForce GP108 (GT1030) unter Kernel >6.1
sorry, vergessen ... bei der Installation der Headers:
und im Log dann wieder:# dpkg -i /var/cache/apt/archives/linux-headers-6.1.0-7-amd64_6.1.20-2_amd64.deb
(Reading database ... 314964 files and directories currently installed.)
Preparing to unpack .../linux-headers-6.1.0-7-amd64_6.1.20-2_amd64.deb ...
Unpacking linux-headers-6.1.0-7-amd64 (6.1.20-2) over (6.1.20-2) ...
Setting up linux-headers-6.1.0-7-amd64 (6.1.20-2) ...
/etc/kernel/header_postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-7-amd64.
Sign command: /usr/lib/linux-kbuild-6.1/scripts/sign-file
Signing key: /var/lib/dkms/mok.key
Public certificate (MOK): /var/lib/dkms/mok.pub
Building module:
Cleaning build area...(bad exit status: 2)
make -j4 KERNELRELEASE=6.1.0-7-amd64 all INCLUDEDIR=/lib/modules/6.1.0-7-amd64/build/include KVERSION=6.1.0-7-amd64 DKMS_BUILD=1...(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.1.0-7-amd64 (x86_64)
Consult /var/lib/dkms/evdi/5.2.14/build/make.log for more information.
dkms autoinstall on 6.1.0-7-amd64/x86_64 succeeded for nvidia-current
dkms autoinstall on 6.1.0-7-amd64/x86_64 failed for evdi(10)
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
dkms: autoinstall for kernel: 6.1.0-7-amd64 failed!
run-parts: /etc/kernel/header_postinst.d/dkms exited with return code 11
Failed to process /etc/kernel/header_postinst.d at /var/lib/dpkg/info/linux-headers-6.1.0-7-amd64.postinst line 11.
dpkg: error processing package linux-headers-6.1.0-7-amd64 (--install):
installed linux-headers-6.1.0-7-amd64 package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
linux-headers-6.1.0-7-amd64
undDKMS make.log for evdi-5.2.14 for kernel 6.1.0-7-amd64 (x86_64)
Sun Jul 23 16:51:27 CEST 2023
make KBUILD_VERBOSE=1 SUBDIRS=/var/lib/dkms/evdi/5.2.14/build SRCROOT=/var/lib/dkms/evdi/5.2.14/build CONFIG_MODULE_SIG= -C /lib/modules/6.1.0-7-amd64/build modules
make[1]: Entering directory '/usr/src/linux-headers-6.1.0-7-amd64'
/usr/src/linux-headers-6.1.0-7-common/Makefile:149: =============== ERROR ==============
/usr/src/linux-headers-6.1.0-7-common/Makefile:150: 'SUBDIRS' was removed in Linux 5.3
/usr/src/linux-headers-6.1.0-7-common/Makefile:151: Use 'M=' or 'KBUILD_EXTMOD=' instead
/usr/src/linux-headers-6.1.0-7-common/Makefile:152: ====================================
/usr/src/linux-headers-6.1.0-7-common/Makefile:153: *** .. Stop.
make[1]: Leaving directory '/usr/src/linux-headers-6.1.0-7-amd64'
make: *** [Makefile:22: all] Error 2
# apt-get install linux-headers-6.3.0-1-amd64
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
linux-headers-6.3.0-1-amd64 is already the newest version (6.3.7-1).
The following packages were automatically installed and are no longer required:
appstream dalvik-exchange dctrl-tools dh-dkms freeglut3 gcc-12-base:i386 gdisk gir1.2-wnck-3.0 libandroid-23-java libblockdev-crypto2 libblockdev-fs2
libblockdev-loop2 libblockdev-part-err2 libblockdev-part2 libblockdev-swap2 libblockdev-utils2 libblockdev2 libbpf0 libchamplain-0.12-0 libchamplain-gtk-0.12-0
libelf-dev libffms2-5 libflac8:i386 libgs9-common libgssdp-1.2-0 libgupnp-1.2-1 libicu71 libicu71:i386 libkf5activitiesstats1 libkf5idletime5 liblc3-0
libllvm14:i386 libmpdec3 libmujs2 libmutter-10-0 libopenal1:i386 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libperl5.34 libpoppler123 libprocps8
libprotobuf23 libpython3.10 libpython3.10-minimal libpython3.10-stdlib libquazip5-1 librygel-core-2.6-2 librygel-db-2.6-2 librygel-renderer-2.6-2
librygel-server-2.6-2 libsane libsixel1 libsnapd-glib1 libsndio7.0:i386 libtiff5:i386 libuuid1:i386 libvkd3d-shader1:i386 libvkd3d1:i386 libvorbisidec1 libxvmc1
libykpers-1-1 libyubikey-udev libyubikey0 libzstd-dev linux-compiler-gcc-11-x86 linux-compiler-gcc-8-x86 linux-compiler-gcc-9-x86 linux-config-5.19
linux-config-6.0 linux-config-6.1 linux-kbuild-5.19 linux-kbuild-5.2 linux-kbuild-5.3 linux-kbuild-6.0 linux-source-5.19 packagekit packagekit-tools
perl-modules-5.34 python3-numpy python3-renderpm python3-reportlab-accel python3.10 python3.10-minimal rsync ruby3.0 viagee vkd3d-compiler:i386
xfce4-datetime-plugin
Use 'apt autoremove' to remove them.
0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded.
1 not fully installed or removed.
After this operation, 0 B of additional disk space will be used.
Do you want to continue? [Y/n]
Setting up linux-headers-6.1.0-7-amd64 (6.1.20-2) ...
/etc/kernel/header_postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-7-amd64.
Sign command: /usr/lib/linux-kbuild-6.1/scripts/sign-file
Signing key: /var/lib/dkms/mok.key
Public certificate (MOK): /var/lib/dkms/mok.pub
Building module:
Cleaning build area...(bad exit status: 2)
make -j4 KERNELRELEASE=6.1.0-7-amd64 all INCLUDEDIR=/lib/modules/6.1.0-7-amd64/build/include KVERSION=6.1.0-7-amd64 DKMS_BUILD=1...(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.1.0-7-amd64 (x86_64)
Consult /var/lib/dkms/evdi/5.2.14/build/make.log for more information.
dkms autoinstall on 6.1.0-7-amd64/x86_64 succeeded for nvidia-current
dkms autoinstall on 6.1.0-7-amd64/x86_64 failed for evdi(10)
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
dkms: autoinstall for kernel: 6.1.0-7-amd64 failed!
run-parts: /etc/kernel/header_postinst.d/dkms exited with return code 11
Failed to process /etc/kernel/header_postinst.d at /var/lib/dpkg/info/linux-headers-6.1.0-7-amd64.postinst line 11.
dpkg: error processing package linux-headers-6.1.0-7-amd64 (--configure):
installed linux-headers-6.1.0-7-amd64 package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
linux-headers-6.1.0-7-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
# apt-cache policy linux-headers-6.3.0-1-amd64
linux-headers-6.3.0-1-amd64:
Installed: 6.3.7-1
Candidate: 6.3.7-1
Version table:
*** 6.3.7-1 500
500 http://deb.debian.org/debian testing/main amd64 Packages
100 /var/lib/dpkg/status
Zuletzt geändert von nahemoth am 23.07.2023 16:59:11, insgesamt 1-mal geändert.
- towo
- Beiträge: 4422
- Registriert: 27.02.2007 19:49:44
- Lizenz eigener Beiträge: GNU Free Documentation License
Re: GForce GP108 (GT1030) unter Kernel >6.1
Dein Problem ist nicht nvidia, sondern evdi-dkms!
Re: GForce GP108 (GT1030) unter Kernel >6.1
und was mache ich da?
# apt-cache policy evdi-dkms
evdi-dkms:
Installed: 1.14.0+dfsg-0.1
Candidate: 1.14.0+dfsg-0.1
Version table:
*** 1.14.0+dfsg-0.1 500
500 http://deb.debian.org/debian testing/main amd64 Packages
500 http://deb.debian.org/debian testing/main i386 Packages
100 /var/lib/dpkg/status
Re: GForce GP108 (GT1030) unter Kernel >6.1
soll ich dann die Headers vom 6.1er wieder löschen? die brauch ich ja dann beim 6.3er nicht mehr?# apt purge evdi-dkms
Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
The following packages were automatically installed and are no longer required:
appstream dalvik-exchange dctrl-tools dh-dkms freeglut3 gcc-12-base:i386 gdisk gir1.2-wnck-3.0 libandroid-23-java libblockdev-crypto2 libblockdev-fs2
libblockdev-loop2 libblockdev-part-err2 libblockdev-part2 libblockdev-swap2 libblockdev-utils2 libblockdev2 libbpf0 libchamplain-0.12-0 libchamplain-gtk-0.12-0
libelf-dev libevdi0 libffms2-5 libflac8:i386 libgs9-common libgssdp-1.2-0 libgupnp-1.2-1 libicu71 libicu71:i386 libkf5activitiesstats1 libkf5idletime5 liblc3-0
libllvm14:i386 libmpdec3 libmujs2 libmutter-10-0 libopenal1:i386 libpcre16-3 libpcre3-dev libpcre32-3 libpcrecpp0v5 libperl5.34 libpoppler123 libprocps8
libprotobuf23 libpython3.10 libpython3.10-minimal libpython3.10-stdlib libquazip5-1 librygel-core-2.6-2 librygel-db-2.6-2 librygel-renderer-2.6-2
librygel-server-2.6-2 libsane libsixel1 libsnapd-glib1 libsndio7.0:i386 libtiff5:i386 libuuid1:i386 libvkd3d-shader1:i386 libvkd3d1:i386 libvorbisidec1 libxvmc1
libykpers-1-1 libyubikey-udev libyubikey0 libzstd-dev linux-compiler-gcc-11-x86 linux-compiler-gcc-8-x86 linux-compiler-gcc-9-x86 linux-config-5.19
linux-config-6.0 linux-config-6.1 linux-kbuild-5.19 linux-kbuild-5.2 linux-kbuild-5.3 linux-kbuild-6.0 linux-source-5.19 packagekit packagekit-tools
perl-modules-5.34 python3-numpy python3-renderpm python3-reportlab-accel python3.10 python3.10-minimal rsync ruby3.0 viagee vkd3d-compiler:i386
xfce4-datetime-plugin
Use 'apt autoremove' to remove them.
The following packages will be REMOVED:
evdi-dkms*
0 upgraded, 0 newly installed, 1 to remove and 1 not upgraded.
1 not fully installed or removed.
After this operation, 172 kB disk space will be freed.
Do you want to continue? [Y/n]
(Reading database ... 314964 files and directories currently installed.)
Removing evdi-dkms (1.14.0+dfsg-0.1) ...
Module evdi-1.14.0+dfsg for kernel 6.1.0-7-amd64 (x86_64).
Before uninstall, this module version was ACTIVE on this kernel.
evdi.ko:
- Uninstallation
- Deleting from: /lib/modules/6.1.0-7-amd64/updates/dkms/
- Original module
- No original module was found for this module on this kernel.
- Use the dkms install command to reinstall any previous module version.
depmod....
Deleting module evdi-1.14.0+dfsg completely from the DKMS tree.
Setting up linux-headers-6.1.0-7-amd64 (6.1.20-2) ...
/etc/kernel/header_postinst.d/dkms:
dkms: running auto installation service for kernel 6.1.0-7-amd64.
Sign command: /usr/lib/linux-kbuild-6.1/scripts/sign-file
Signing key: /var/lib/dkms/mok.key
Public certificate (MOK): /var/lib/dkms/mok.pub
Building module:
Cleaning build area...(bad exit status: 2)
make -j4 KERNELRELEASE=6.1.0-7-amd64 all INCLUDEDIR=/lib/modules/6.1.0-7-amd64/build/include KVERSION=6.1.0-7-amd64 DKMS_BUILD=1...(bad exit status: 2)
Error! Bad return status for module build on kernel: 6.1.0-7-amd64 (x86_64)
Consult /var/lib/dkms/evdi/5.2.14/build/make.log for more information.
dkms autoinstall on 6.1.0-7-amd64/x86_64 succeeded for nvidia-current
dkms autoinstall on 6.1.0-7-amd64/x86_64 failed for evdi(10)
Error! One or more modules failed to install during autoinstall.
Refer to previous errors for more information.
dkms: autoinstall for kernel: 6.1.0-7-amd64 failed!
run-parts: /etc/kernel/header_postinst.d/dkms exited with return code 11
Failed to process /etc/kernel/header_postinst.d at /var/lib/dpkg/info/linux-headers-6.1.0-7-amd64.postinst line 11.
dpkg: error processing package linux-headers-6.1.0-7-amd64 (--configure):
installed linux-headers-6.1.0-7-amd64 package post-installation script subprocess returned error exit status 1
Errors were encountered while processing:
linux-headers-6.1.0-7-amd64
E: Sub-process /usr/bin/dpkg returned an error code (1)
Re: GForce GP108 (GT1030) unter Kernel >6.1
so, nun habe ich den .3.0-1-amd64 installiert, X startet nicht mehr, im syslog sagt er:
Thx!
aber, die Header sind installiert.2023-07-24T19:59:34.092789+02:00 Home systemd[1]: displaylink-driver.service: Control process exited, code=exited, status=1/FAILURE
2023-07-24T19:59:34.093023+02:00 Home systemd[1]: displaylink-driver.service: Failed with result 'exit-code'.
2023-07-24T19:59:34.093338+02:00 Home systemd[1]: Failed to start displaylink-driver.service - DisplayLink Driver Service.
2023-07-24T19:59:39.248299+02:00 Home systemd[1]: displaylink-driver.service: Scheduled restart job, restart counter is at 404.
2023-07-24T19:59:39.248935+02:00 Home systemd[1]: Stopped displaylink-driver.service - DisplayLink Driver Service.
2023-07-24T19:59:39.282261+02:00 Home systemd[1]: Starting displaylink-driver.service - DisplayLink Driver Service...
2023-07-24T19:59:39.287307+02:00 Home sh[17078]: modprobe: FATAL: Module evdi not found in directory /lib/modules/6.3.0-1-amd64
2023-07-24T19:59:39.351736+02:00 Home sh[17114]: Error! Your kernel headers for kernel 6.3.0-1-amd64 cannot be found at /lib/modules/6.3.0-1-amd64
/build or /lib/modules/6.3.0-1-amd64/source.
2023-07-24T19:59:39.351863+02:00 Home sh[17114]: Please install the linux-headers-6.3.0-1-amd64 package or use the --kernelsourcedir option to tel
l DKMS where it's located.
2023-07-24T19:59:39.353668+02:00 Home systemd[1]: displaylink-driver.service: Control process exited, code=exited, status=1/FAILURE
2023-07-24T19:59:39.353914+02:00 Home systemd[1]: displaylink-driver.service: Failed with result 'exit-code'.
Thx!