Heute früh kam dann ein Update für hplip
Ich hier mal die Ganze Liste, was kam, da eventuell auch python3 dieses böse Spiel
mitgespielt hat:
Code: Alles auswählen
[UPGRADE] cracklib-runtime:amd64 2.9.6-5+b1 -> 2.9.6-5.1
[UPGRADE] git:amd64 1:2.42.0-1 -> 1:2.43.0-1
[UPGRADE] git-man:amd64 1:2.42.0-1 -> 1:2.43.0-1
[UPGRADE] hpijs-ppds:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] hplip:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] hplip-data:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] hplip-gui:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] libaom3:amd64 1:3.7.1-dmo1 -> 1:3.8.0-dmo1
[UPGRADE] libaudit-common:amd64 1:3.1.1-1 -> 1:3.1.2-1
[UPGRADE] libaudit1:amd64 1:3.1.1-1+b1 -> 1:3.1.2-1
[UPGRADE] libcrack2:amd64 2.9.6-5+b1 -> 2.9.6-5.1
[UPGRADE] libdecor-0-0:amd64 0.2.0-1 -> 0.2.1-1
[UPGRADE] libdecor-0-plugin-1-cairo:amd64 0.2.0-1 -> 0.2.1-1
[UPGRADE] libhpmud0:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] libpython3.11:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] libpython3.11-dev:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] libpython3.11-minimal:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] libpython3.11-stdlib:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] libsane-hpaio:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] lightdm-settings:amd64 1.8.1-1 -> 2.0.1-1
[UPGRADE] printer-driver-hpcups:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] printer-driver-hpijs:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] printer-driver-postscript-hp:amd64 3.22.10+dfsg0-3 -> 3.22.10+dfsg0-4
[UPGRADE] python3-blinker:amd64 1.6.3-1 -> 1.7.0-1
[UPGRADE] python3-unrardll:amd64 0.1.7-1 -> 0.1.7-2
[UPGRADE] python3.11:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] python3.11-dev:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] python3.11-minimal:amd64 3.11.6-3 -> 3.11.7-2
[UPGRADE] slick-greeter:amd64 1.8.1-0.1 -> 2.0.1-1
von hplip auch meist ein neues Plugin fällig ist.
hp-systray sagt mir: Gerät nicht erreichbar
Ping: nicht erreichbar
Drucker ein/aus
Rechner Neustart
Unter dem Schreibtisch Kabel gesucht : alles i.O. Buchsen blinken.
Oberfläche der Fritte sagt mir: Gerät gesperrt wg. Kindersicherung
Aha
Hab ich nie eingestellt (bin das einzige Kind im Hause)
Fritte sagt mir: Neues BS vorhanden ---> also gut mach ich mal ein Upgrade
Neustart Fritte /Neustart Rechner / Neustart Drucker
Warum auch immer : Sieg über die EDV ----> Drucker wieder da.
Zum Abschluss als Beweis noch das Journal:
Code: Alles auswählen
journalctl -b |grep hp
Dez 12 07:19:42 XFCE kernel: clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
Dez 12 07:19:42 XFCE kernel: acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
Dez 12 07:19:42 XFCE kernel: hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
Dez 12 07:19:42 XFCE kernel: hpet0: 8 comparators, 64-bit 24.000000 MHz counter
Dez 12 07:19:42 XFCE kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Dez 12 07:19:42 XFCE kernel: snd_hda_codec_realtek hdaudioC1D0: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
Dez 12 07:20:09 XFCE python3[1674]: io/hpmud/jd.c 94: unable to read device-id
Dez 12 07:20:09 XFCE hp-systray[1674]: [1623]: error: Unable to communicate with device (code=12): hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.0.7
Dez 12 07:20:09 XFCE hp-systray[1674]: hp-systray(hpdio)[1674]: error: Device not found
Dez 12 07:25:59 XFCE hp-systray[1674]: io/hpmud/jd.c 94: unable to read device-id
Dez 12 07:25:59 XFCE hp-systray[1674]: [1623]: error: Unable to communicate with device (code=12): hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.0.7
Dez 12 07:25:59 XFCE hp-systray[1674]: hp-systray(hpdio)[1674]: error: Device not found
Dez 12 07:26:05 XFCE hp-systray[1674]: io/hpmud/jd.c 94: unable to read device-id
Dez 12 07:26:05 XFCE hp-systray[1674]: [1623]: error: Unable to communicate with device (code=12): hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.0.7
Dez 12 07:26:05 XFCE hp-systray[1674]: hp-systray(hpdio)[1674]: error: Device not found
Dez 12 07:40:01 XFCE hp-systray[1674]: io/hpmud/hpmud.c 246: invalid channel_open state, current io_mode=raw/uni service=HP-MESSAGE hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.0.7
Dez 12 07:40:01 XFCE hp-systray[1674]: io/hpmud/hpmud.c 702: invalid channel_close state
Dez 12 07:40:07 XFCE hp-systray[1674]: io/hpmud/jd.c 695: timeout read_channel sec=6 hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.0.7
Dez 12 07:40:14 XFCE hp-systray[1674]: io/hpmud/jd.c 695: timeout read_channel sec=6 hp:/net/HP_LaserJet_Pro_MFP_M125nw?ip=192.168.0.7
Dez 12 07:40:15 XFCE dbus-daemon[1411]: [session uid=1000 pid=1411] Activating via systemd: service name='ca.desrt.dconf' unit='dconf.service' requested by ':1.76' (uid=1000 pid=14517 comm="/usr/bin/simple-scan hpaio:/net/HP_LaserJet_Pro_MF")
Dez 12 07:40:26 XFCE simple-scan[14517]: io/hpmud/model.c 534: no laserjet_pro_mfp_m125nw attributes found in /usr/share/hplip/data/models/models.dat
Dez 12 07:40:26 XFCE simple-scan[14517]: io/hpmud/model.c 545: no laserjet_pro_mfp_m125nw attributes found in /usr/share/hplip/data/models/unreleased/unreleased.dat